HG 1/144 GQuuuuuuX HD Fluorescent Waterslide Decals
HG 1/144 GQuuuuuuX HD Fluorescent Waterslide Decals Precision-cut HD fluorescent waterslide decals designed exclusively for the HG 1/144 GQuuuuuuX (GMS-Ω) from Mobile Suit Gundam GQuuuuuuX — featuring vivid glow-in-the-dark markings and official specification accuracy.
⚠️ BUNDLE DISCOUNT POLICY
All bundled items enjoy free standard shipping worldwide
20% automatic discount when purchasing any two decal sets
30% discount applied for three or more selected sets
Discounts auto-apply in cart with eligible combinations
Valid for in-stock items only.
HD Fluorescent Ink — Vivid Markings That Command Attention
- The GQuuuuuuX's Omega Psycommu system markings are reproduced in high-definition fluorescent ink, delivering sharp warning labels and unit codes that glow vividly under UV or blacklight.
- Printed on ultra-thin transparent film, these decals melt into the kit's armor surface once sealed — far outperforming standard stickers in both clarity and realism.
Specification-Accurate Pre-Cut Decals — Built for the GMS-Ω
- Every marking is precision die-cut and mapped directly to Bandai's official HG 1/144 GQuuuuuuX manual — from chest unit codes to weapon identifiers, each decal is shaped and scaled to its designated panel.
- Designed exclusively for the GQuuuuuuX (GMS-Ω) from Mobile Suit Gundam GQuuuuuuX (2025), covering armor panels, shield markings, and thruster warning labels across the full kit.
Seamless Application for Builder-Friendly Results
- Designed with accessibility in mind — no trimming required. Simply soak, slide into position, and set. A shallow water dish and tweezers are all you need to get started.
- The fluorescent finish elevates the GQuuuuuuX's signature purple-and-white armor scheme with a vivid, competition-grade layer of detail that standard decals can't replicate.
Care Instructions
- ▸ Clean applied areas with a soft brush or microfiber cloth — avoid abrasive materials that may scratch the decal film.
- ▸ Apply a clear top coat (gloss or matte) after decal placement to seal and protect the markings from handling wear.
- ▸ Do not use solvents or enamel thinners directly on unsealed decals, as these may dissolve the film.
- ▸ Store unused decal sheets in a cool, dry place away from direct sunlight to preserve adhesive strength.
⚠️ IMPORTANT NOTES BEFORE PURCHASING!
These are waterslide decals (not peel-and-stick stickers); they require water and basic tools for application.
Applying a clear coat after placement is strongly recommended to protect the fluorescent markings from wear.
Slight color and finish variations may exist between production batches due to the printing process.
This product contains decals only; the HG 1/144 GQuuuuuuX model kit is sold separately.
Suitable for all skill levels, but patience is recommended for best results on curved surfaces.
Document any defects or shipping damage within 48 hours of delivery.
Frequently Asked Questions
Q: Are these waterslide decals or regular stickers?
These are waterslide decals — they require soaking in water before application. Unlike peel-and-stick stickers, waterslide decals blend into the model surface for a realistic, factory-painted look once a top coat is applied.
Q: What tools do I need to apply these decals?
You'll need tweezers, a shallow dish of water, a cotton swab or toothpick for positioning, and optionally Mr. Mark Setter / Mr. Mark Softer (or equivalent decal softening solution) for best results on curved surfaces.
Q: Do the fluorescent markings actually glow in the dark?
Yes. The HD fluorescent ink is UV-reactive — the markings glow vividly under blacklight or UV light. Under normal lighting, they display as sharp, high-contrast graphics.
Q: Will these fit the MG 1/100 GQuuuuuuX?
No. These decals are designed specifically for the HG 1/144 scale GQuuuuuuX (GMS-Ω) from Mobile Suit Gundam GQuuuuuuX. They will not align correctly on MG or other scale kits.
Q: How do I remove the clear film after applying the decal?
After the decal dries, you can carefully peel away the transparent carrier film using tweezers. For stubborn edges, a soft eraser or gentle rubbing with a cotton swab works well.
Q: Should I apply a top coat over the decals?
Strongly recommended. A clear top coat (gloss or matte, depending on your preferred finish) seals and protects the decals from scratches, moisture, and handling wear over time.
Original: $12.99
-70%$12.99
$3.90
Description
HG 1/144 GQuuuuuuX HD Fluorescent Waterslide Decals Precision-cut HD fluorescent waterslide decals designed exclusively for the HG 1/144 GQuuuuuuX (GMS-Ω) from Mobile Suit Gundam GQuuuuuuX — featuring vivid glow-in-the-dark markings and official specification accuracy.
⚠️ BUNDLE DISCOUNT POLICY
All bundled items enjoy free standard shipping worldwide
20% automatic discount when purchasing any two decal sets
30% discount applied for three or more selected sets
Discounts auto-apply in cart with eligible combinations
Valid for in-stock items only.
HD Fluorescent Ink — Vivid Markings That Command Attention
- The GQuuuuuuX's Omega Psycommu system markings are reproduced in high-definition fluorescent ink, delivering sharp warning labels and unit codes that glow vividly under UV or blacklight.
- Printed on ultra-thin transparent film, these decals melt into the kit's armor surface once sealed — far outperforming standard stickers in both clarity and realism.
Specification-Accurate Pre-Cut Decals — Built for the GMS-Ω
- Every marking is precision die-cut and mapped directly to Bandai's official HG 1/144 GQuuuuuuX manual — from chest unit codes to weapon identifiers, each decal is shaped and scaled to its designated panel.
- Designed exclusively for the GQuuuuuuX (GMS-Ω) from Mobile Suit Gundam GQuuuuuuX (2025), covering armor panels, shield markings, and thruster warning labels across the full kit.
Seamless Application for Builder-Friendly Results
- Designed with accessibility in mind — no trimming required. Simply soak, slide into position, and set. A shallow water dish and tweezers are all you need to get started.
- The fluorescent finish elevates the GQuuuuuuX's signature purple-and-white armor scheme with a vivid, competition-grade layer of detail that standard decals can't replicate.
Care Instructions
- ▸ Clean applied areas with a soft brush or microfiber cloth — avoid abrasive materials that may scratch the decal film.
- ▸ Apply a clear top coat (gloss or matte) after decal placement to seal and protect the markings from handling wear.
- ▸ Do not use solvents or enamel thinners directly on unsealed decals, as these may dissolve the film.
- ▸ Store unused decal sheets in a cool, dry place away from direct sunlight to preserve adhesive strength.
⚠️ IMPORTANT NOTES BEFORE PURCHASING!
These are waterslide decals (not peel-and-stick stickers); they require water and basic tools for application.
Applying a clear coat after placement is strongly recommended to protect the fluorescent markings from wear.
Slight color and finish variations may exist between production batches due to the printing process.
This product contains decals only; the HG 1/144 GQuuuuuuX model kit is sold separately.
Suitable for all skill levels, but patience is recommended for best results on curved surfaces.
Document any defects or shipping damage within 48 hours of delivery.
Frequently Asked Questions
Q: Are these waterslide decals or regular stickers?
These are waterslide decals — they require soaking in water before application. Unlike peel-and-stick stickers, waterslide decals blend into the model surface for a realistic, factory-painted look once a top coat is applied.
Q: What tools do I need to apply these decals?
You'll need tweezers, a shallow dish of water, a cotton swab or toothpick for positioning, and optionally Mr. Mark Setter / Mr. Mark Softer (or equivalent decal softening solution) for best results on curved surfaces.
Q: Do the fluorescent markings actually glow in the dark?
Yes. The HD fluorescent ink is UV-reactive — the markings glow vividly under blacklight or UV light. Under normal lighting, they display as sharp, high-contrast graphics.
Q: Will these fit the MG 1/100 GQuuuuuuX?
No. These decals are designed specifically for the HG 1/144 scale GQuuuuuuX (GMS-Ω) from Mobile Suit Gundam GQuuuuuuX. They will not align correctly on MG or other scale kits.
Q: How do I remove the clear film after applying the decal?
After the decal dries, you can carefully peel away the transparent carrier film using tweezers. For stubborn edges, a soft eraser or gentle rubbing with a cotton swab works well.
Q: Should I apply a top coat over the decals?
Strongly recommended. A clear top coat (gloss or matte, depending on your preferred finish) seals and protects the decals from scratches, moisture, and handling wear over time.
